Vert Energy Group

Tag: carbon footprint

How Using Energy Benchmarking Can Reduce Your Carbon Footprint
One of the most important global challenges of our day is climate change. The built environment, which includes office buildings and homes, contributes to carbon emissions. According to the World Economic Forum, about 33% of the world’s carbon emissions come from energy used to power buildings. Therefore, lowering energy use in buildings is essential for climate change mitigation.

Energy benchmarking is a useful strategy for lowering building energy use. Energy benchmarking is assessing a building’s energy efficiency and contrasting it with that of comparable structures. This procedure identifies chances to boost energy efficiency and points up areas that need improvement.

In this article, we will look at the advantages of energy benchmarking and how it can lower your carbon footprint. We will talk about the benefits, which range from cost savings and higher effectiveness to better building performance and increased sustainability. Additionally, we will look at a few of the typical difficulties with energy benchmarking and offer workable answers to them. You will have a good knowledge of the significance of energy benchmarking and how to successfully apply it in your building by the conclusion of this essay.

1. Understanding Energy Benchmarking

Comparing a building’s energy performance to a standard or set of standards is a procedure known as Energy Benchmarking. The procedure entails monitoring the energy usage of a facility and looking for areas that might be improved. Here are some more specifics:

How Energy Benchmarking Works

Energy benchmarking involves collecting data on a building’s energy usage, including electricity, gas, and water usage. The data is then compared to a set of standards or benchmarks to determine the building’s energy performance. Some of the common benchmarks used for energy benchmarking include:
- Energy Star
- ASHRAE
- LEED
- Green Globes
Once the energy performance is determined, building owners and managers can identify opportunities for improvement and develop a plan to reduce energy consumption.

Types of Energy Benchmarking

There are several types of energy benchmarking, including:
- Whole building benchmarking
- Portfolio benchmarking
- Targeted benchmarking
Whole building benchmarking involves comparing the energy performance of an entire building to a set of standards. Portfolio benchmarking compares the energy performance of a group of buildings, while targeted benchmarking focuses on specific areas or systems within a building.

Importance of Energy Benchmarking

Energy benchmarking is important because it enables building owners and managers to make informed decisions about energy usage, reduce energy waste, and save money. By benchmarking energy usage, building owners can:
- Identify areas of improvement
- Set energy performance goals
- Prioritize energy efficiency upgrades
- Track progress and measure results
Overall, energy benchmarking is a powerful tool that can help building owners and managers reduce their carbon footprint and contribute to a more sustainable future.

2. How to Implement Energy Benchmarking

Energy benchmarking implementation calls for a systematic process that includes conducting energy audits, acquiring energy data, establishing performance targets, and pinpointing areas for improvement.

Conducting Energy Audits

Conducting an energy audit is the first step in implementing the energy benchmarking process. An energy audit involves evaluating a building’s energy use and identifying potential areas for improvement. The audit can be conducted by an energy consultant or performed in-house by building staff.

During an energy audit, the following steps are typically taken:
- Review of energy bills
- Walkthrough of the building to identify energy systems and usage
- Review of maintenance logs
- Interview with building staff to identify energy issues
Gathering Energy Data

Gathering energy data is the second step in implementing the energy benchmarking process. Building owners and managers can gather energy data by:
- Collecting energy bills
- Installing sub-meters to track energy usage by the system or tenant
- Implementing a building automation system to track energy usage in real-time
The energy data should be collected regularly, such as monthly or quarterly, to ensure energy usage trends can be identified.

Setting Performance Goals

Setting performance goals is the third step in implementing energy benchmarking. Performance goals should be based on industry standards and best practices. Some of the common performance goals include gaining either:
- Energy Star certification
- LEED certification
- Green Globes certification
The performance goals should be challenging yet achievable.

Identifying Opportunities for Improvement

Identifying opportunities for improvement is the fourth step in implementing energy benchmarking. Building owners and managers can identify opportunities for improvement by:
- Analyzing energy data
- Conducting a cost-benefit analysis of potential upgrades
- Prioritizing upgrades based on cost and energy savings potential
Some of the areas for improvement include lighting, HVAC systems, and building envelopes.

3. Benefits of Energy Benchmarking

Energy benchmarking offers several benefits, including cost savings, increased efficiency, improved building performance, and enhanced sustainability.

Cost Savings

One of the most significant benefits of energy benchmarking is cost savings. By identifying areas for improvement and implementing energy efficiency upgrades, building owners and managers can reduce energy consumption and save money on energy costs. According to the Environmental Protection Agency (EPA), buildings that benchmark energy usage can save up to 7% annually on energy costs.

Increased Efficiency

By locating energy wastage, energy benchmarking also contributes to efficiency growth. Building owners and managers may decrease energy waste and boost the effectiveness of their building systems by adopting energy efficiency enhancements. This can therefore result in enhanced building performance and greater occupant comfort.

Improved Building Performance

Building owners and managers may enhance the efficiency of their building systems by identifying potential areas for improvement and putting those improvements into practice. Numerous advantages may result from this, including better maintenance of building systems, enhanced occupant comfort, and improved indoor air quality. In the end, energy benchmarking may assist property owners and managers in improving the experience for their renters or residents while also lowering their carbon footprint and promoting a more sustainable future.

Enhanced Sustainability

Enhancing sustainability through energy benchmarking may be beneficial. Reduced energy use may help building owners and managers lower their carbon impact and advance a more sustainable future. Building managers and owners may increase the lifespan of building systems and encourage sustainable practices by installing energy efficiency modifications. These advantages can result in cost savings over the long run and better building performance in addition to having a favorable effect on the environment. In the end, energy benchmarking may assist building managers and owners in meaningfully influencing the future to be more resilient and sustainable.

4. Challenges of Energy Benchmarking

While there are many benefits to energy benchmarking, there are also some challenges that building owners and managers should be aware of. Some of the common challenges include:

Data Collection

Accurately gathering energy data can be a challenging task, particularly for buildings with multiple tenants or submeters. Collecting energy data can be time-consuming and expensive when dealing with renters or subcontractors, and building owners and managers may be required to address these challenges.

Fortunately, there are several solutions available to simplify the data collection process. For example, building owners and managers can invest in smart meters, which can automatically monitor and report energy usage data in real-time. Additionally, implementing energy management systems can provide a centralized platform for tracking energy consumption across multiple buildings and tenants.

Cost

While implementing energy benchmarking and energy efficiency upgrades can be beneficial for building performance and sustainability, they can also come with a significant price tag. Building owners and managers need to carefully consider the costs of upgrades against the potential energy savings to determine if the investment is worthwhile.

Fortunately, there are several financing options available to help building owners and managers implement energy efficiency upgrades without breaking the bank. For example, government grants and incentives may be available to support building upgrades, and energy service companies (ESCOs) can provide financing solutions to help offset upfront costs.

Lack of Expertise

Implementing energy benchmarking and energy efficiency upgrades requires a certain level of expertise in energy management and building systems. Building owners and managers may need to hire energy consultants or provide training for their staff to ensure that these practices are implemented effectively.

Expert energy consultants can provide valuable insights into building systems and energy usage patterns, helping building owners and managers identify areas for improvement and develop strategies for optimizing energy efficiency. In addition, providing staff training on energy-efficient practices can help ensure that building systems are used efficiently and that energy-saving opportunities are not missed.

Conclusion

In conclusion, energy benchmarking is a practical and effective way to reduce carbon footprint and improve building performance. By implementing energy benchmarking, building owners and managers can save money on energy costs, reduce greenhouse gas emissions, and contribute to a more sustainable future. Although challenges exist, the benefits of energy benchmarking outweigh the costs, making it a worthwhile investment. We encourage building owners and managers to embrace energy benchmarking and make a positive impact on the environment.

If you are looking for an Energy Benchmark expert for your property, contact us at VertPro.com! We are an award-winning Energy Benchmarking and Audit Consultancy, recognized on Inc. 5000, providing innovative SaaS technology-based solutions for Building Owners & Property Managers to Simplify Energy Compliance with all 50+ Energy Benchmarking & Energy Efficiency Laws Nationwide. From Energy Benchmarking to Energy Audits/RCx Plus and Construction Marketplace, VertPro® has you covered.
May 18, 2023
Which Renewable Energy is Better, Wind or Solar?

As global energy consumption rises, finding sustainable ways to produce electricity is growing ever more important. Numerous renewable energy sources are available, such as wind and solar power, but which of these should you choose?

In this blog post, we’ll explore the potential of wind and solar power, their advantages and disadvantages over traditional fuel sources, and their suitability for different locations.

What is Wind Energy?

Wind energy is one of the oldest forms of renewable energy. It’s a form of solar energy that harnesses the kinetic power of wind and converts it into useful mechanical or electrical energy. Wind turbines are used to capture the wind’s kinetic power, converting it into electricity through an electric generator.

This electricity can then be stored in batteries or used to power businesses directly. Wind energy is clean and has few environmental impacts, making it an attractive renewable energy resource for many people.

Many countries worldwide have invested in wind farms and large collections of wind turbines that generate significant electricity. It is estimated that wind energy could potentially provide up to 20% of global electricity demand by 2050.

The wind turbine is also becoming more affordable and cost-efficient, making it a viable option as a solar power system for people looking to reduce their carbon footprint. With further technological advancements, wind energy could be the key to a cleaner and more sustainable future.

At present, wind power is mainly used for electricity generation across Europe and North America. In the US, wind power generates about 5% of total electricity generation. In some countries like Denmark, more than 40% of all power generated comes from wind.

However, the UK is one of the major players in this area of more green energy sources, with a growing number of wind farms across the country. Wind energy provides an important renewable energy source and is set to significantly contribute to meeting the growing global demand for electricity.

Pros of Wind and Solar Energy

The following are the pros of solar and wind energy:

1. Wind energy is a renewable power source, of energy which means it will never run out and is continually replenished. It does not emit any air pollution, making it an attractive form of clean and green energy.

2. Wind turbines are a more efficient power source and can produce large amounts of energy over their life span, making them an attractive form of energy generation in rural regions.

3. Wind turbines can be installed onshore or offshore, depending on the location’s wind patterns. This flexibility allows for greater access to potential sources of energy.

4. Wind energy has the potential to create thousands of new jobs in installation and maintenance, as well as related industries such as manufacturing and research & development.

5. Once installed, operating costs are relatively low since no fuel is required to move solar panels and the wind turbines generate energy from the wind.

6. Wind turbines and solar panels can be installed in areas unsuitable for traditional development forms, preserving natural habitats while providing clean energy.

7. Solar and Wind emit no carbon dioxide or other greenhouse gases, making it a form of clean energy that can help reduce our carbon footprint.

8. Wind is widely available in many parts of the world, making it an ideal renewable energy source.

9. With advances in technology, wind turbines are now much quieter than they used to be, reducing the noise pollution associated with wind energy production.

10. Wind turbines require minimal maintenance compared to other forms of energy generation, making the less maintenance of them an attractive option for green energy and producers.

Cons of Wind Energy

The following are the cons of wind energy:

1. Wind energy systems can be expensive to install, especially large-scale ones. It can cost millions of dollars to build just one wind turbine farm.

2. Wind turbines require reliable wind in order to generate electricity, so they are not always the best option for remote locations that don’t have access to regular wind sources.

3. Wind turbines can have a negative effect on the local environment by disturbing wildlife habitats, interfering with migration paths, and even affecting weather patterns in some areas.

What is Solar Energy?

Solar energy is the form of energy that is derived from the sun. It is one of the most abundant and clean sources of renewable energy available. Solar energy has been around since ancient times, but modern advances in technology have made it much easier to capture and convert into usable electricity or heat.

Solar power can be used to generate electricity, heat water for hot showers, or provide lighting for businesses. It can even be used to produce renewable fuels such as hydrogen. Solar energy is an incredibly efficient, clean, renewable energy source that will help reduce our dependence on fossil fuels and minimize greenhouse gas emissions.

With the right technology, solar energy could revolutionize how we power our businesses.

There are many benefits to utilizing a solar panel for energy, including reduced electricity bills, lower maintenance costs, and the potential to save on energy costs over time. Additionally, solar energy is a safe form of energy that will not damage the environment and do not pose any health risks when used properly.

As technology advances and becomes more affordable, solar energy will become increasingly accessible and play a bigger role in powering our lives.

Pros of Solar Energy

Here are some of the pros of solar energy:

1. Solar energy is renewable and can be used endlessly without running out.

2. Solar energy does not produce any pollutants or greenhouse gases, making it environmentally friendly to use.

3. Solar energy can be used both in off-grid solar farms and on-grid to provide clean, green, reliable power for businesses and even entire communities.

4. It is easy to install and does not require complex wiring or costly infrastructure.

5. Solar energy is silent and does not produce any noise pollution.

6. Solar energy systems are versatile and can be used to power a wide range of applications, from lighting to powering entire cities.

Cons of Solar Energy

1. Solar energy is a relatively expensive renewable power source compared to traditional sources such as coal and natural gas. The high installation costs make it difficult for many households or businesses to install solar panels independently.

2. Weather conditions can greatly influence the amount of energy a solar panel system produces, leading to inconsistent energy production.

3. Solar energy systems require the same amount of regular maintenance and upkeep. The panels must be cleaned regularly to ensure optimal performance, and the batteries must be replaced periodically.

4. Many solar panel systems are not designed for long-term use and may need to be upgraded or replaced after a few years of operation in order to maintain maximum efficiency.

Comparison of Cost, Maintenance, and Efficiency between Wind and Solar Power

Wind and other energy, compared to solar power, are renewable sources of energy that can be used to generate electricity. However, there are significant differences between the two in terms of cost, maintenance, and efficiency.

Cost:

Wind power is generally less expensive than solar power, especially for large-scale projects, due to the lower initial outlay required. Solar power, however, is the most cost-effective choice for residential projects because of its affordability and availability.

Maintenance:

Wind turbines require frequent maintenance to keep them running at optimal efficiency; this includes regular inspections and repairs as necessary. Solar cells and panels, on the other hand, are much simpler to maintain and only need occasional cleaning.

Efficiency:

Wind energy is generally more efficient than solar power because of its greater availability and ability to generate electricity even at low wind speeds. However, solar energy is the most reliable renewable energy source due to its ability to produce electricity even on cloudy days.

Overall, both wind and solar energy are viable alternatives for generating electricity. It is important to consider the cost, maintenance, and efficiency of each when choosing which one to invest in. Depending on the specific needs of each project, one may be more advantageous than the other.

Conclusion

All in all, choosing between wind and solar energy is a deeply subjective decision. Weighing up the pros and cons, it’s clear that although wind and solar have individual advantages, they both help tackle climate change while providing clean energy.

While one might be the better option for your business than the other, ultimately, it will depend on which works best with your budget, location, and lifestyle. Ultimately, whether you go wind or solar, you can feel confident that it’s an important part of taking care of our planet for generations to come.

Together, these technologies offer hope for a cleaner future powered by renewable energy resources that are sustainable in our fight against climate change. VertPro® can help you make a better choice. Sign up today to make your life easier!

April 12, 2023
What are the Benefits of Renewable Energy for Business Owners

As businesses across the world are looking for new ways to reduce their carbon footprint, renewable energy sources have become an increasingly attractive path forward.

Not only does investing in renewable energy allow companies to do their part for the environment by reducing emissions and saving non-renewable resources like oil, but it also holds several unique economic advantages that make it a wise financial decision as well.

In this post, we’ll dive into exactly how renewable energy can benefit your business, from lowering costs and increasing efficiency to improving employee morale and creating positive public perception of your organization. Read on to learn all about why investing in renewable energy makes smart business sense!

Basics Of Renewable Energy

Renewable energy is a cutting-edge technology transforming how we approach sustainability and protecting the environment. From solar farms to wind turbines, renewable sources of energy offer vast potential for reducing emissions, improving air quality and conserving natural resources.

By harnessing nature’s power, whether it be from the sun, wind or water, renewable energy systems provide clean and reliable electricity without generating harmful pollutants.

Innovative advances in this field have made significant strides in increasing efficiency while decreasing cost – making it an increasingly viable solution to traditional methods of energy production.

With a more conscious shift toward renewables, we can minimize our ecological footprint while harnessing the many advantages provided by this rapidly evolving industry.

Types Of Renewable Energies And What Are They Used For

There are many different types of renewable energies that are being used and explored today. These include solar, wind, hydropower, geothermal, and biomass energy.

Solar Energy

Solar energy is a viable renewable energy source that can power homes, businesses, and entire cities. By harnessing the power of sunlight and converting it into electricity, solar energy can bring significant economic benefits and contribute to global sustainability.

In addition to its economic benefits, this eco-friendly form of energy production can help reduce emissions, contribute to better air quality and even provide clean water in developing countries.

With these types of benefits, solar energy is an investment worth considering for anyone looking to save money while helping preserve our planet for generations to come.

Wind Energy

Wind energy is a powerful source of renewable energy that is already powering entire regions and economies across the world.

By harnessing the kinetic energy of the wind, wind turbines are able to generate electricity that can be used in an array of applications. The best wind resources are found in rural areas, such as ocean coasts and mountain ridges, with a steady flow of strong winds.

There, turbines efficiently convert the wind into mechanical power, which is then turned into electricity that can be used for various purposes, from providing individual homes with electricity to servicing entire cities.

Wind energy has rapidly become one of the fastest growing global clean energies and continues to revolutionize how mankind produces its much-needed electricity.

Hydropower

Producing electricity with the force of falling water almost sounds like something out of a fairytale. But that’s exactly what hydropower does – and it’s one of the most widely used sources of renewable energy today.

As the world attempts to reduce its dependence on fossil fuels and move towards a greener future, nations have come to recognize the potential in harnessing hydropower as an efficient and dependable energy source.

Simple yet effective turbines take advantage of naturally occurring waterfalls and rivers, transforming the kinetic energy into electricity that can be sent directly for use or stored later.

Advances in turbine technology mean that countries large and small can now access hydropower as a reliable electricity provider – from providing a full power grid to powering an individual home.

Hydropower shows no signs of slowing down: as we continue towards a bright renewable future, this clean energy source offers limitless possibilities.

Geothermal Energy

Using geothermal energy is an innovative and cost-efficient way to power homes, businesses and even entire cities. By channelling the natural heat from beneath the earth’s surface, we can tap into something that is truly renewable and sustainable.

Not only does this form of energy produce little or no emissions, but it can also provide heating systems with a constant source of hot water – making geothermal energy significantly lower on both operation and maintenance costs.

Moreover, geothermal energy is also exceptionally reliable because temperature below the surface tends to stay constant throughout the seasons. All in all, these factors make it clear why geography plays such a central role in taking advantage of this renewable energy source – one which will become increasingly utilised as people seek ways to reduce their environmental footprint while still having access to 24/7 electricity supply.

Biomass Energy

Biomass energy is a clean and renewable electricity source with great potential benefits. These include using renewable resources like wood, crop residues, manure, and other biological materials that can be used to generate electricity and for heating and cooling applications.

This form of energy promotes energy security for a region or country and provides economic development opportunities due to the value of bioproducts created in the production process. Furthermore, biomass energy helps reduce carbon emissions from burning fossil fuels, making it an attractive and sustainable solution for the entire world.

All of these types of renewable energies have different advantages and disadvantages. Solar energy is one of the most widely used forms of renewable energy due to its abundance, cost effectiveness, and lack of greenhouse gas emissions.

Wind energy is also gaining popularity due to its ability to generate large amounts of electricity with relatively little environmental impact. Hydropower, geothermal energy, and biomass energy are all more expensive than solar or wind but can provide reliable sources of energy as well.

Benefits Of Renewable Energy Technologies

Utilizing solar panels and other renewable energy technologies are becoming increasingly popular to create clean and green energy that can significantly reduce energy bills. In fact, solar systems can generate solar power with no emissions or pollutants, while natural gas is still considered a cleaner alternative to electricity generated by fossil fuels.

Furthermore, governments worldwide have begun offering green energy incentives – such as solar rebates – to those investing in solar installation or renewable energy technology. With such financial incentive policies in place, now might be the right time to start thinking about switching to solar.

Things To Consider When Using Any Renewable Energy Form

When it comes to using any form of renewable energy, there are several things to consider. First and foremost, global warming emissions should be taken into account. Renewable energy sources will drastically reduce the global warming emissions that come from burning fossil fuels for energy production compared to traditional sources like coal and oil.

Additionally, renewable energy sources are becoming increasingly affordable, meaning that people have more access to cleaner and greener forms of energy; this has the potential to significantly drive down global energy prices if utilized on a global scale.

Lastly, when deciding whether or not a particular renewable source is suitable, its availability must also be considered. Different areas around the world may have greater access to certain types of renewable energy than others based on factors such as seasons or geography. All these details should be considered when deciding which type of renewable energy form is appropriate for your needs.

The Final Verdict

Renewable energy has a lot of benefits for businesses. It can help them save money, reduce their carbon footprint, and become more sustainable. If you’re interested in learning more about how your business can benefit from renewable energy, contact Vert Energy Group today. We specialize in helping businesses switch to renewable energy sources and would happily answer any of your questions.

March 28, 2023