Author: Clarence Cannon

Vert Energy Group – New York City Local Law 97 Compliance Due this Year

New York City Local Law 97 is a subset of the Climate Mobilization Act, a groundbreaking piece of legislation aimed at reducing greenhouse gas emissions in the city. Mayor de Blasio has pledged to address these emissions as part of his plan to make the city carbon neutral by 2050. The goal of Local Law 97 is to reduce greenhouse gas emissions produced by New York City’s largest buildings by 40% by 2030 and 80% by 2050. Buildings account for approximately two-thirds, or 70%, of New York City’s total greenhouse gas emissions making them a critical area for reduction.

Local Law 97 (LL97) is a green energy policy that requires most buildings over 25,000 square feet to meet new energy efficiency limits and reduce their greenhouse gas emissions by 2024, with even stricter limits coming into effect by 2030. Local Law 97 generally covers the following buildings, with some exceptions:

• Buildings that exceed 25,000 gross square feet

• Two or more buildings on the same tax lot that together exceed 50,000 square feet

• Two or more buildings owned by a condo association that are governed by the same board of managers and that together exceed 50,000 square feet

LL97 requires buildings to meet specific emissions limits, which vary based on the type of building and its occupancy. The limits are expressed in pounds of carbon dioxide equivalent per square foot per year (CO2e/sf/yr). Building owners who fail to comply with Local Law 97 will face significant penalties. The penalty for non-compliance is $268 per metric ton of CO2e which exceeds the building’s emissions limit. For a building that is 50,000 square feet and exceeds its emissions limit by 100 metric tons of CO2e, the penalty would be $26,800 per year. The penalties can add up quickly, making compliance a top priority for building owners and operators.

• 1st Deadline is 2024 (+ additional 40% reduction required by 2030.)

• Penalty for non-compliance: $268 per metric ton over the limit

The first compliance deadline is quickly approaching, and building owners and operators must act quickly to ensure compliance. Here’s why:

• 2022 = Plan & Implement Energy Upgrades

• 2023 = Plan & Implement Energy Upgrades (Last chance to make upgrades)

• 2024 = 1 full year of proven energy reduction

• 2025 = Will determine if you are in compliance based on the 2024 Benchmark Report

Local Law 97 is one of the most ambitious plans for reducing emissions in the nation, and to comply with LL97, building owners and operators must take a multi-pronged approach. The first step is to benchmark the building’s energy consumption and compare the building’s energy use to that of similar buildings. Building owners must submit this benchmarking data annually to the city, as required by Local Law 84. Local Law 84 requires that property owners submit a Benchmarking report annually for all properties over 25,000 square feet to adjust any areas of excessive energy consumption data or mismanagement.

Local Law 88, imposed by the department of buildings in NYC, established lighting upgrade and submetering requirements. Local Law 87 mandates buildings over 50,000 gross sq. ft. to undertake intensive yet periodic energy audits and retro-commissioning measures. Building owners must conduct an energy audit and submit an Energy Efficiency Report every 10 years that outlines any energy savings opportunities found during the energy audit. Conducting an energy audit is the second step in complying with LL97 and is used to identify opportunities for energy efficiency improvements.

The audit must be conducted by a qualified professional and must comply with the requirements of Local Law 87 and will identify energy-saving measures that can be implemented to reduce the building’s emissions. Once the energy audit is complete, building owners must develop an emissions reduction plan that outlines the measures they will take to comply with Local Law 97. The plan must be submitted to the city for approval, and owners must implement the measures within a certain timeframe. This is why it is imperative you move quickly to complete your energy audit, submit plans to the city for approval (which can be time consuming) with enough time left to complete any upgrades prior to 2024, wherein you must have a full year of proven energy reduction. Some of the measures that can be implemented to comply with Local Law 97 include upgrading building systems such as heating, ventilation, and air conditioning (HVAC), installing energy-efficient lighting, and improving building insulation. Building owners may also consider installing renewable energy systems such as solar panels or wind turbines to generate clean energy on-site.

We asked experts in the field for insight into how Local Law 97 is affecting building owners and managers in terms of compliance and the difficulties in meeting the requirements of this law.

“The first thing to grasp about this law is -does it, and to what extent affects you and your building. We began working with the planning and contributions to this local law nearly a decade ago. Local law 97 was since amended numerous times but formally in 2019 through the changes made by local law 147… After understanding if and to what extent this law affects you, the next step is to fully consume how and what changes are required so you can develop a phased strategy…In addition to these (described above) measurements there are required prescriptive or preventive and proactive activities. Some of these include:

• Adjusting temp set points for heat and hot water

• Reporting all heating system leaks

• Maintaining a clean heating system in good operating condition

• Installing insulation and temp controls for radiating heat units, and steam condensate tanks

• Replacing or repairing steam traps

• Indoor and outdoor heating system sensors for efficient temp control, proper set points in boiler operations

• Upgrading legacy lighting systems to energy efficient systems

• Weatherization and air sealing ducts, building envelopes and points of fenestration.

• Installing timers on exhaust fans

• Installing radiant barriers behind all radiators

The city has set up parameters for forming a team of capable professionals and how to submit proof of scope completed. It is important to recognize a lack of submittal in addition to a false submittal accrue significant fines. False submittal have fine amounts of up to 500,000 and max fines include potential 30 day imprisonment. These laws are best phases and pre planned to spread costs across available budget.

We typically see our clients pairing our lighting conversions with longer yield projects to immediately begin accruing energy savings as an offset. In general this law deals with reducing the energy consumption footprint within these systems HVAC, hot water, conveyance, lighting, electrical systems. We work strategically with our clients to maximize the impact of return on each dollar spent making these advances.” – K.A. Stacie Alexiou | Certified Energy Manager and CEO of WATT + FLUX

“From our perspective as experts in the boiler and heating industry, compliance with LL97 has been challenging. There are some relatively economical solutions for building owners to reduce their boiler emissions, such as pipe insulation, new steam vents, lowering the steam pressure, and tuning burners. The issue is that the savings from these solutions do not come close to the aggressive emission targets outlined in LL97. To approach the targets, you may have to install a high-efficiency boiler or replace your current fossil fuel system with an electric alternative. Installing a new boiler today in a large building could cost over $100,000. Even with a new boiler, there is no guarantee that the new boiler will hit the LL97 target.

In some cases, the property owners remove their boilers and current heating system in favor of an electric system. Though this may work in some instances, there are many reasons why this is not practical. Running the outdoor condensers and refrigerant piping destroys the aesthetic of the building facade. Finding the internal space for the indoor blowers in every room is also challenging. Some buildings lack the electrical power to support electric heating systems.

NYC building owners are already under pressure due to existing regulations. Unless the electric heating technology advances, complying with LL97 will be a significant challenge.” –Vincent Caputo, Insparisk LLC

Building owners and operators must take swift action to comply with the law’s emissions limits and avoid substantial fines. Get started on your compliance before it’s too late by scheduling a free consultation with a project advisor. Learn all the details of New York’s Local Law 97 and discuss best practices for improving your buildings’ energy efficiency. We can also get you multiple bids from various contractors, engineers, and specialists in our network. Schedule a consultation to see how VertPro® can help you execute your building’s upgrades and meet compliance for LL97.

“Building owners are enthusiastic in my experience as the NYS and NYC Govts have put in place numerous incentives that are quite rich at the moment to help with compliance. Additionally, they are happy the changes will save them money long term” -Anthony Pereira: altPOWER

Why You Should Start Your Benchmark Earlier

As the world moves towards a more sustainable future, energy benchmarking has become an essential tool for businesses and organizations looking to reduce their carbon footprint and save on energy costs. Energy benchmarking involves measuring and tracking a building’s energy usage over time and comparing it to similar buildings to identify opportunities for improvement. This can be a complicated process, especially if you’re benchmarking a large building or facility, as it requires gathering and analyzing a large amount of data, as well as interpreting that data in a meaningful way. If you are about to start energy benchmarking, here’s a few reasons why you should start sooner rather than later.
• Identifying inefficiencies early can save you money – The earlier you start benchmarking your building’s energy usage, the sooner you’ll be able to identify any inefficiencies and start taking action to address them. This can save you money on energy costs in the long run, as well as help you avoid costly repairs or upgrades down the line.
• It’s easier to implement changes when you have a baseline- By starting your energy benchmarking early, you’ll be able to establish a baseline for your building’s energy usage. This will make it easier to track changes over time and determine whether the changes you make are having a positive impact. It will also help you set realistic goals for reducing energy usage and establish a plan of action for achieving those goals.
• You’ll be better prepared for future regulations- As governments around the world continue to implement regulations aimed at reducing greenhouse gas emissions, energy benchmarking is likely to become a requirement for many businesses and organizations. By starting your energy benchmarking early, you’ll be better prepared for any future regulations that may be implemented in your area.
• You’ll be doing your part to help the environment- Reducing energy usage is one of the most effective ways to reduce greenhouse gas emissions and combat climate change. By starting your energy benchmarking early, you’ll be doing your part to help the environment and contribute to a more sustainable future.
Ready to Start Benchmarking? Here’s what you need to know:
One of the biggest challenges of benchmarking is gathering accurate and reliable data. This typically involves working with utility companies to obtain data on a building’s energy usage, which can be a time-consuming process. In some cases, utility companies can take 4-6 weeks or longer to send their data, which can delay the benchmarking process and make it more complicated, especially if you are required to comply by a specific deadline.
The amount of time it takes to request utility forms for an energy benchmark can vary depending on several factors, including the specific utility company, the type of forms needed, and the method of request. In some cases, utility forms may be available online and can be downloaded and submitted immediately. In other cases, it may be necessary to contact the utility company directly to request the forms, which can take several weeks to receive. Once the forms have been requested and received, the time required to complete the energy benchmarking process will depend on the specific requirements of the analysis. Basic benchmarking analysis may only require a few weeks to complete, while more comprehensive analysis may take several months or longer.
It is important to note that some utility companies may require additional information or documentation before providing the forms, which can add to the time required for the request. Additionally, if there are errors or discrepancies in the data provided on the forms, it may be necessary to request additional information or clarification, which can further delay the energy benchmarking process. To minimize delays and ensure a smooth and efficient energy benchmarking process, it is recommended to plan ahead and allow plenty of time for requesting and receiving utility forms. It may also be helpful to work with a qualified energy consultant or service provider who has experience with the energy benchmarking process and can help to streamline the data collection and analysis process.
Another challenge of benchmarking is ensuring that the data you collect is accurate and reliable. This requires careful attention to detail and the use of specialized software and tools to analyze the data and identify patterns and trends. Interpreting the results of the benchmarking process can be challenging, as there are many factors that can influence energy use. For example, a building located in a hot climate may use more energy for cooling than a building located in a cooler climate. Similarly, a building that is used primarily during the day may use more energy for lighting than a building that is used primarily at night. To account for these and other factors, it may be necessary to perform a more detailed analysis of the data. This could involve the use of sophisticated software tools that can model the building’s energy use and simulate different scenarios.
In addition to analyzing the data, it is also important to act based on the results of the benchmarking process. This may involve making changes to the building or facility to reduce energy use, such as upgrading to more energy-efficient equipment or improving insulation. Overall, energy benchmarking is a complicated process that requires a thorough understanding of building systems and energy use. It can be an important tool for identifying opportunities for energy savings, but it must be done carefully and accurately to produce meaningful results.
Keeping up with various energy benchmarking regulations across the country can be complex and time-consuming. Energy Benchmarking does not have to be hard. VertPro® is proud to provide a Group Webinar on March 15th, 2023. This educational webinar discusses Evolving Energy Benchmark Requirements, 6 Common Pitfalls to Avoid in Benchmarking and Best Practices to Plan for 2023. Experts in Energy Benchmarking will show you how to complete a Benchmark, why it is important, who enforces it, and how VertPro® can help you with compliance. Sign up now for this educational Group Webinar on March 15, 2023 to learn more!
Despite these challenges, benchmarking can be a valuable tool for businesses and organizations looking to reduce their energy usage and carbon footprint. While it can be a complicated process that requires careful attention to detail and specialized tools and software, by identifying inefficiencies and areas for improvement, benchmarking can help businesses save money on energy costs, reduce their environmental impact, and improve the overall performance of their buildings and facilities.

LA EBEWE Rescinds Tolling

The LA EBEWE (Existing Buildings Energy and Water Efficiency) ordinance is a regulation passed by the city of Los Angeles, California, that aims to improve the energy and water efficiency of existing buildings in the city. As part of the ordinance, building owners are required to submit an annual report on their building’s energy and water usage, known as the EBEWE report.
In response to the COVID-19 pandemic, the city of Los Angeles issued an emergency order in March 2020 that tolled (i.e., paused) the deadline for building owners to submit their 2019, 2020, and 2021 EBEWE Benchmark and A/RCx reports. This was done to provide relief to building owners who were facing difficulties in meeting the original deadline due to the pandemic.
On February 28, 2023, the city of Los Angeles rescinded the tolling order, which means that the deadline to submit has been re-enacted. LADBS is in the process of preparing “reissued” notices to comply for the years/cycles that were tolled and for which a building has not yet complied. These reissued notices will provide 6 months to comply from the date of the Notices. This means building owners who have not yet submitted their benchmark reports for 2019-2021 are now required to do so within 6 months of receiving a reissued notice.
Notices to comply that will be reissued are as follows:
• Benchmark Program Years 2019, 2020, and 2021.
• Audits & Retro-Commissioning (A/RCx) Compliance Years
• CY 2021- buildings with an LABDS Building ID that ends in “0” or “1”
• CY 2022-buildings with an LABDS Building ID that ends in “2” or “3”
As a business owner in the Los Angeles area, you may be aware of the requirement for energy audits under the Los Angeles Existing Buildings Energy and Water Efficiency (EBEWE) program. As the tolling has been rescinded the deadline for energy audits that were due in 2021 and 2022 (with the above buildings ID’s) has been updated to September 2023.
It’s worth noting that the LA EBEWE ordinance is an important tool in the city’s efforts to reduce greenhouse gas emissions and combat climate change. By requiring building owners to report on their energy and water usage, the city can identify areas where improvements can be made and encourage building owners to take steps to reduce their carbon footprint.
Rescinding the tolling order is an important step in ensuring that building owners are held accountable for their energy and water usage and that the city can continue to make progress in its efforts to promote sustainability. While it may be an inconvenience for some building owners, it’s a necessary step in the fight against climate change. If you have not signed up for your initial site inspection for your 2021 or 2022 energy audit, do so now: EBEWE LA’s Existing Buildings Energy & Water Efficiency Program (vertpro.com), as scheduling will be limited and assigned by first come, first served. Don’t miss the upcoming compliance deadline! See below for the complete City notice:

“LOSE AN HOUR IN THE MORNING, AND YOU WILL BE ALL DAY HUNTING FOR IT.― RICHARD WHATELY”

History Behind the Blarney Stone
If you’ve ever been to Ireland or read about its folklore, you’ve likely heard of the Blarney Stone. This mystical rock is said to give those who kiss it the gift of eloquence and the ability to persuade with words. But what is the Blarney Stone, and why is it so famous?
The Blarney Stone is a block of limestone that is part of the battlements of Blarney Castle in County Cork, Ireland. The origins of the stone are shrouded in mystery, but it is said to have been brought to Ireland from the Holy Land during the Crusades. Legend has it that the stone was originally part of Jacob’s Pillow, which Jacob rested his head on when he dreamt of the ladder to heaven in the Bible.
The Blarney Stone has been the subject of countless myths and legends over the centuries. One story says that the stone was once used as a seat by the goddess Cliodhna, who gave it to Cormac McCarthy, the king of Munster, in gratitude for his kindness. Another tale tells of a witch who was saved from drowning by a king, who then rewarded him with the stone.
The tradition of kissing the Blarney Stone dates back to the 16th century. It is said that Queen Elizabeth I of England sent her envoy to Ireland to demand that the Irish chieftains submit to her rule. The chieftain of Blarney Castle, Cormac Teige McCarthy, was a skilled diplomat and managed to evade the envoy’s demands with his persuasive words. In appreciation, Queen Elizabeth I is said to have declared that anyone who visited Blarney Castle and kissed the stone would be blessed with the gift of eloquence.
Today, visitors to Blarney Castle can climb to the top of the castle’s tower and lean backward over a parapet to kiss the Blarney Stone. It’s not an easy feat – the stone is located about 20 feet above the ground, and kissing it requires a certain amount of bravery and flexibility. But those who manage to do so are said to be granted the “gift of the gab” – the ability to speak persuasively and convincingly.
Of course, the idea that kissing a stone can give you the gift of eloquence is purely a myth. There’s no scientific evidence to support the claim. But that hasn’t stopped millions of visitors from all over the world from making the journey to Blarney Castle to kiss the stone.
The Blarney Stone is a fascinating piece of Irish folklore. Whether you believe in its powers or not, it’s worth a visit to Blarney Castle to see it for yourself. And who knows – maybe you’ll be inspired to give a stirring speech or win an argument after you’ve kissed the stone!

Fun Fact: NYC is the most linguistically diverse city in the world.
One of the most amazing facts about New York City is that it’s the most linguistically diverse city in the world. New Yorkers speak over 800 languages, and four in ten households speak at least one language other than English. After English, the top spoken languages are Spanish, Chinese, Russian, and Italian. Of the five boroughs, Queens is the most linguistically diverse neighborhood, not just in NYC but in the world. Source

Stephanie’s Section
Chat GPT
Chat GPT, a growing phenomenon has the masses divided. Will it enhance or ruin? Let’s discuss…from a unique perspective. ChatGPT: A Breakthrough in Natural Language Processing
Artificial intelligence (AI) has made significant strides in recent years, with applications ranging from self-driving cars to image recognition. One area that has seen significant progress is natural language processing (NLP), which aims to enable computers to understand and generate human-like language. ChatGPT, a language model developed by OpenAI, represents a breakthrough in this field.
At its core, ChatGPT is a deep learning algorithm that has been trained on vast amounts of text data to learn the patterns and structures of natural language. This training process enables ChatGPT to understand the context and meaning behind text-based conversations and generate responses that are fluent and coherent, often indistinguishable from those of a human. This is achieved through a technique called transformer-based language modeling, which allows the model to consider the entire context of the conversation and generate responses that are appropriate and relevant.
One of the most significant features of ChatGPT is its ability to learn from vast amounts of data, which enables it to continually improve its responses over time. This means that the more data that is fed into the model, the better it becomes at generating accurate and relevant responses.
The applications for ChatGPT are numerous and varied. One of the most common uses is in chatbots, which are automated systems that can interact with users through text-based conversations. By integrating ChatGPT into chatbots, businesses can provide more efficient customer service and reduce the need for human operators. Chatbots can also be used to assist with tasks such as appointment scheduling and order tracking.
Another application of ChatGPT is in language translation. By training the model on multiple languages, it can be used to translate text between different languages, enabling users to communicate with people who speak different languages. This can be especially useful for businesses that operate in multiple countries or for individuals who travel frequently.
ChatGPT can also be used for content creation by generating text based on a given prompt. This can be useful for writing articles, social media posts, and other forms of content. By generating content that is relevant and engaging, businesses can improve their online presence and attract more customers.
In addition to its practical applications, ChatGPT represents a significant step forward in our understanding of natural language processing. By developing a language model that can generate human-like responses, we are one step closer to achieving true artificial intelligence.
However, as with any technology, there are also potential risks associated with the use of ChatGPT. One concern is that the model may be used to generate fake news or propaganda, which could have serious consequences for society. Additionally, there is the risk of bias in the training data, which could result in the model generating responses that are discriminatory or offensive.
Overall, ChatGPT represents a significant advancement in the field of natural language processing and has the potential to revolutionize the way we interact with computers and technology. While there are certainly risks associated with its use, the benefits of this technology are clear, and it is likely that we will see continued development and refinement of language models like ChatGPT in the years to come.
I asked ChatGPT to “Write an article explaining ChatGPT from your perspective” and you just read what it came up with. After reading, what do you think? Scary? Life Changing? Ahead of its time? You tell us.

Want your Make Your Building Green? Get an Energy Audit! »

Search by Zip to Find Applicable Energy Laws

There are over 30 cities/states with Energy Benchmark requirements – 16 have Energy Audit requirements as well! Use this free tool to check if your building has an upcoming Energy Benchmark or Energy Audit deadline.
FIND OUT HERE »

March 7, 2023

Vert Energy Group – 2023 New Energy Benchmark Deadlines

All Energy Benchmark Deadlines for 2023

With a new year comes new benchmarking laws and requirements! Starting in 2023, both New Jersey State and Miami, Florida will be adding to the already existing 54 city/states with benchmarking requirements around the country.

New Jersey State Law will require benchmarks to be completed by October 1, 2023, while the “Building Efficiency 305” ordinance of Miami has various deadlines depending on the square footage of your building. Properties covered under Miami’s “Building Efficiency 305’ ordinance include multi-family and commercial buildings with 200,000 square feet or more to complete their initial compliance by June 30, 2023, and buildings between 100,000 sq. ft. and 199,999 sq. ft. to complete initial compliance by October 1, 2023. This new year also sees Colorado State adopting a new annual deadline of June 1, 2023.

For L.A. building owners and property managers, it is very important to note, the previously instated Covid-19 protocols have been rescinded, and notices to comply for EBEWE deadlines will be reissued. “Effective February 28, 2023, in accordance with the end of the State of California COVID-19 emergency, I hereby rescind the public Order Under City of Los Angeles Emergency Authority issued on January 28, 2022. Notwithstanding this action, all entitlements already approved and still valid as of this date, or approved during the effective period…” – Mayor Karen Bass

Based on this rescission action, the tolling of EBEWE deadlines will terminate on February 28, 2023. LADBS is in the process of preparing “reissued” notices to comply for the years/cycles that were tolled and for which building has not yet complied. These reissued notices will provide 6 months to comply from the date of the notices.

Stay in the know and get started on your benchmark early, as it can take anywhere from 4-7 weeks to complete! Below is a compiled list of all benchmark deadlines based on the city/state laws:

City/State	2023 Energy Benchmark Deadlines
Ann Arbor, MI	June 1
Atlanta, GA	June 1
Austin, TX	June 1
Berkeley, CA	July 1
Bloomington, MN	June 1
Boon, MA	May 15
Boulder, CO	June 1
Brisbane, CA	May 15
California (ate)	June 1
Cambridge, MA	May 1
Chicago, IL	June 1
Cincinnati, OH	January 1
Colorado (ate)	June 1
Columbus, OH	June 1
Denver, CO	June 1 (Extended to August 1)
Des Moines, IA	July 1
Edina, MN	June 1
Evanston, IL	June 30
Fort Collins, CO	January 1
Houston, TX	January 1
Indianapolis, IN	June 1
Kansas City, MO	May 1
Los Angeles, CA	June 1
Louisville, KY	January 1
Miami, FL	June 1
Miami-Dade County, FL	January 1
Minneapolis, MN	June 1
Montgomery County, MD	June 1
New Jersey, NJ	October 1
New Orleans, LA	January 1
New York City, NY	May 1 (Extended to November 30)
Ontario, Canada	July 1
Orlando, FL	May 1
Philadelphia, PA	June 30
Pittsburgh, PA	June 1
Portland, OR	January 1
Portland, ME	May 1
Providence, RI	January 1
Reno, NV	July 1
Saint Louis, MO	May 1
Saint Paul, MN	January 1
Salt Lake City, UT	May 1
San Diego, CA	June 1
San Francisco, CA	April 1
San Jose, CA	May 1
Seattle, WA	July 1
South Portland, ME	May 1
St. Louis Park, MN	June 1
Washington (State)	April 1
Washington, DC	April 1

“Formula for success: rise early, work hard, strike oil.” – J. Paul Getty

2023 Energy Audit Deadlines

With every coming year, we see energy audit requirements becoming more prevalent in cities/states across the United States. Energy audits take a significant time to complete so it is important to get started now! Outlined below are all energy audit deadlines for 2023.

City/State	Audit Deadlines for 2023
Atlanta, GA	Dec 31, 2023: Bldg IDs ending in “3”
Austin, TX	Time of Sale
Berkeley, CA	July 1, 2023: Bldgs 50,000 sq. ft. and larger
Boston, MA	December 31, 2023: Bldgs > 50,000 sq. ft.
Boulder, CO	June 1, 2023: Bldgs 30,000 to 49,999 sq. ft.
Edina, MN	June 1, 2023: Bldgs 50,000 to 99,999 sq. ft.
Los Angeles, CA	June 1, 2023: Bldg IDs ending in “4” Dec 1, 2023: Bldg IDs ending in “5”
New York City, NY	Dec. 31, 2023: Tax block number ending in “3”
Salt Lake City, Utah	Dec 31, 2023: Tax IDs ending in “4” and “5” and over 50,000 sq. ft.; Tax IDs ending in “2” and “3” and 25,000 – 49,999 sq. ft.
San Francisco, CA	Apr 1, 2023: Non-residential bldgs 10,000 to 24,999 sq. ft.
San Jose, CA	May 1, 2023: APNs ending in “4” and “5”
South Portland, ME	May 1, 2023: Bldgs >5,000 sq. ft.
Seattle, WA	Oct. 1, 2023: bldgs ≥ 200,000 sq. ft

San Francisco Fire Horns 2023 Deadline

The City of San Francisco requires all multi-family buildings to upgrade fire alarm systems to pass the “Pillow Test” to comply with the SFFC Section 1103.7.6.1.
After several devastating apartment fires hit the City in 2016, the San Francisco Board of Supervisors passed legislation to seriously strengthen safety in multi-family properties. Most of these requirements went into effect shortly thereafter. However, a new mandate goes into effect on July 1, 2023 requiring a manual fire alarm system that would be more likely to wake sleeping residents.

These new alarms are more effective not just because they are louder, it is due to the fact they use low-frequency horns or speakers that are more likely to wake a sleeping person. These lower frequencies require more energy to make them sound and unfortunately most existing fire alarm systems are not designed to handle the additional power required. Therefore, a new system will often be required to be installed before July 1, 2023.

The deadline for multi-family housing is only a few months away, and this can often be a lengthy process. The city has stated that if the engineering drawings for the fire horn installation are submitted to the city before the deadline, you won’t be fined if the work is completed after. Get started today and receive multiple quotes for fire horn installation with VertPro® Upgrades. Join the other satisfied property management companies who have already complied with VertPro® Upgrades: https://vertpro.com/sf-fire-horn-reminder

“Once an organization loses its spirit of pioneering and rests on its early work, its progress stops.”-Thomas J. Watson

10 Unique and Quirky Things to do for Valentine’s Day

This Valentine’s Day switch up your normal dinner and movie routine and do one of the following unique and quirky ideas to celebrate your loved one! Below are a few ideas to get your creative juices flowing: 1. Hot Air Balloon Ride- Treat your loved one to a once in a lifetime experience this valentine’s day! See a new place or your hometown from a different perspective…literally! 2. Take a romantic road trip together. If you have the time and resources, take your sweetheart on a special trip to explore places that are unique and special to you as a couple. Pack up some snacks and plan for some stops along the way to make it extra special. 3. Plan a picnic at a scenic spot. Whether you prefer oceanside, mountainside, or even a lovely park nearby, find a spot to picnic and enjoy each other’s company in the great outdoors. Bring some of your favorite snacks and drinks with you to make it extra special. 4. Check out your local farmer’s market. Buy some fresh ingredients and cook an amazing meal together at home. This can be especially nice if you don’t normally get to spend much time in the kitchen together. 5. Spend the day antiquing and find a unique gift for each other. Whether you are looking for something big or small, antique stores can offer some truly special finds that will make a great lasting memory. 6. Go ice skating or rollerblading together. Enjoy the fresh air and get some exercise while trying something new. 7. Take a stroll through your favorite part of town and discover hidden gems that are local only to you. This can be an especially nice activity if there is a special place that has meaning in your relationship. 8. Visit a local museum or gallery and explore different works of art. Take in some new perspectives and spark conversations about your favorite pieces. 9. Go on a hunt for the best pizza in town and find out who really has the best pie. Enjoy trying different slices and talking about what you like best. 10. Volunteer for a local cause, that is important to you both. Give back to the community and feel good about making a difference. Explore our https://www.pulidodentalcare.com/procedures/medecines.html to discover a range of natural cosmetics crafted from plant-based ingredients at affordable prices. Experience professional skincare benefits from the first application of our cosmetic products, designed to nurture and enhance your skin’s health and vitality. Don’t have a special someone to celebrate with this Valentine’s Day? Don’t stress, instead take this opportunity to experience any of the above with family, friends, or even better, just yourself! Do something new and exciting you’ve been wanting to try!

Fun Fact: No one knows who St. Valentine was

Some say St. Valentine lived in Rome and was killed by emperor Claudius the second. He was said to be a priest and physician who was killed after being discovered as marrying couples as a way for men to avoid military service. Another theory is St. Valentine was a bishop in Terni, Italy, while there is also another possibility that both these stories…are about the same man. While we will never know for sure, and the Catholic church removed St. Valentine off the Roman Calendar in 1969, the church continues to recognize him as a saint, and we continue to celebrate our loved ones in his honor.

Stephanie’s Section

Share the Door Rose!

With Valentine’s Day just around the corner…we wanted to talk about one of the most famous “love stories” ever. No, not “The notebook” …this one involves a much bigger boat. While far from the movies most notable storyline…. the great love story found in the movie adaption of “Titanic” has been the cause of contention for many in the last decade. While the focus of the Titanic tragedy is a much larger and more important story, the love story invented for the movie adaption…has caused arguments across dinner tables, and friendships alike! The big issue: Rose not sharing the door!

Recently, director James Cameron recreated the floating door scene to answer the question for once and all…. could rose have shared the door to save jack. The final answer: No! Armed with a team of scientists Cameron re-staged the scene to test everyone’s theory that jack could have survived on the door with rose. Cameron and his team tested four different hypotheses in which jack joined rose on the door. While in 2 out of 4 hypothesis’ jack was able to get onto the door, ultimately both were then subjected to the freezing temperatures of the water. In another hypothesis, Cameron notes that while jack is out of the water and stabilized “He got into a place where if we projected that out, he just might’ve made it until the lifeboat got there. Jack might’ve lived, but there’s a lot of variables. I think his thought process was, ‘I’m not going to do one thing that jeopardized her,’ and that’s 100 percent in character.” – James Cameron

There you have it folks, directly from the director’s mouth, while jack might have physically been able to survive by climbing on the door with rose, his love for her would have never allowed him to risk her life. Which, if you think about it, is an even better love story. Source

Search by Zip to Find Applicable Energy Laws

There are over 30 cities/states with Energy Benchmark requirements – 16 have Energy Audit requirements as well! Use this free tool to check if your building has an upcoming Energy Benchmark or Energy Audit deadline.

February 9, 2023

Vert Energy Group – Ringing in the New Year with a New Website and New BM Laws

Happy New Year from our Vert Energy Group Family to yours! We look forward to continuing to serve our property managers and building owners in 2023 and are thrilled to share some exciting news!

VertPro® is ringing in the new year with a new platform with a fresh new design, improved speed, and easier to use! With a growing client base and ever-changing energy efficiency laws, the new platform will create a better customer experience by managing multi-service compliance requirements in one easy-to-use space. From energy benchmarking and energy audits to building upgrades and rebates, the new platform will identify all energy-saving opportunities for multi-building portfolios nationwide, with the click of a button.

Both new and existing users will enjoy the new and improved dashboard which consolidates all the building’s information into one safe and secure place. A notable new feature is the chat box which adds to a more user-friendly platform, creating ease of contacting a professional with any questions. A refresh of the energy scorecard tool utilizes all your building’s information to discover the amount of money that potentially can be saved by implementing energy-saving measures.

As of 2022, there were 54 Benchmarking laws nationwide, all with various and ever-changing requirements. Starting in 2023 that number jumps to 56, as New Jersey State and Miami, Florida adopt Benchmarking laws, with other cities and states following suit in future years. Starting in 2023, New Jersey State Law requires a benchmark to be completed by October 1, 2023, while the “Building Efficiency 305” ordinance of Miami has various deadlines depending on the square footage of your building. Properties covered under Miami’s “Building Efficiency 305’ ordinance include multi-family and commercial buildings with 20,000 square feet or greater of floor space and 5 or more units. The Miami deadlines are as follows:

Size (Gross Floor Area)	Initial Compliance Required by:
Buildings 200,000 sq. ft. or larger	June 30, 2023
Buildings between 100,000 – 199,999 sq. ft.	October 1, 2023
Buildings between 50,000 – 99,999 sq. ft.	October 1, 2024
Buildings between 20,000 – 49,999 sq. ft.	October 1, 2025

Source: Building Efficiency 305 – BE305 – Miami (miamigov.com)

VertPro® makes it easy to comply with all energy benchmarks, energy audits, mandatory building upgrades, and improvement laws nationwide. Find trusted contractors and simplify the process of the various, often confusing, local, and federal sustainability regulations with VertPro®. Stay in compliance, identify underperforming systems, and get multiple bids reviewed by a specialist, for all your building’s projects. Whether you have 1 property or hundreds, the VertPro® Platform does it all.

“I like the dreams of the future better than the history of the past.” – Thomas Jefferson

New Weekly Blog Series on VertPro.com/Blog/

– Locations

• Los Angeles, CA
• New York, NY
• Chicago, IL
• Austin, TX
• San Diego, CA
• San Jose, CA

– Commercial Service Types

• Landscaping Contractors
• Plumbing Contractors
• Roofing Contractors
• Renovation/Remodel
• Concrete Contractors
• Electrician Contractors

Another exciting project of 2023 brings you a weekly blog series! As an industry expert, VertPro® powered by Vert Energy Group, is offering our expertise in various project categories, with a weekly blog series to provide you with critical information to help you make informed decisions. You’ll be able to find them on both VertEnergyGroup.com and VertPro.com.

You can find frequently asked questions answered, more information about various laws, or simply additional knowledge and expertise on how to make your building more energy efficient. We know it can be difficult and time-consuming to find qualified and comparable vendors to complete large projects and understanding how to read bids can make the best of us crazy! These blogs will answer all those questions and more! Not fully aware of what your building requires to comply with state or city laws, this blog will help identify those exact requirements. Looking for more information on how to make your building more efficient and potentially save time and money? You’ve come to the right place! Check out a few that are already posted:

The importance of creating a defined process for Los Angeles Benchmarking : Importance Of Creating Process For Los Angeles Benchmarking (vertenergygroup.com)

Why you should Invest in NYC Energy Benchmarking to Reduce your Carbon Footprint: Invest In NYC Energy Benchmarking To Reduce Carbon Footprint (vertenergygroup.com)

How Los Angeles Energy Benchmarking Performs: A Comparative Study: Los Angeles Energy Benchmarking Performs-A Comparative Study (vertenergygroup.com)

LL84 Benchmarking and How It Affects ROI: NYC LL84 Benchmarking Report And How It Affects ROI (vertenergygroup.com)

The Arctic Blast and how much strain it can put on a heating system

As you may have personally experienced, an arctic blast recently brought about extremely cold temperatures, heavy snow, and high winds to much of the United States. This has caused at minimum many travel disruptions amidst the holiday season, but many around the country were more severely impacted by blizzards and dangerous negative-degree wind chills. A particularly harsh winter can put a lot of strain on your heating system, and as one of the most important parts of keeping your business safe and warm, it’s important to know how to best care for its efficient operation.

Heating systems should be routinely serviced and properly maintained to prepare for the cold winter months. They should be inspected regularly for any wear and tear that may have occurred during the summer months, as well as ensuring all safety settings are up to date and not expired. Additionally, filters should be replaced regularly to ensure that the system is clean and functioning at its highest efficiency. Heating systems should also be checked for proper levels of antifreeze, which will help keep the system running smoothly throughout the colder months. Finally, any blockages should be cleared to avoid any additional strain due to freezing temperatures. With proper maintenance and preparation, you can make sure that your heating system will be able to handle even the coldest winters.

As well as regular maintenance, understanding your specific type of heating system can really make a difference when preparing for the cold winter season. Heating systems come in all shapes and sizes, and some require special maintenance requirements or procedures. Taking the time to research your system will ensure that you know how best to prepare it for heavy winters.

Two questions we always hear are what to do if you lose power in the winter, and what temperature is best to leave your heating system. If you do lose power during a winter storm it is important to take the necessary precautions to protect yourself and your heating system. If you are using an electric heater, make sure that all cords are unplugged before venturing outside in cold weather. Additionally, use flashlights or lanterns instead of candles as these are much safer when dealing with a power outage. In the event of a prolonged power outage, it is important to keep your heating system turned off as this can help to protect against any damage that may occur due to a lack of power. The best temperature to leave your heating system on during a particularly harsh winter depends on your needs and the type of heating system you have. Heating systems should be adjusted accordingly to keep your business comfortable during cold winter months, while also avoiding any unnecessary strain that may arise with too high temperatures.

Taking care of your heating system will ensure that it runs properly and efficiently all winter long. Heating systems should not be taken lightly, but with proper preparation and maintenance, you can ensure that your system is ready to handle even the most extreme winter conditions. Heating systems are an essential part of keeping warm in the winter so take the time to get to know yours!

“Cheers to a new year and another chance for us to get it right.” —Oprah Winfrey

Does everyone celebrate the New Year on the same day?

New Year is a widely celebrated holiday around the world, with many countries having their own specific New Year traditions. Some countries celebrate New Year’s according to the Gregorian calendar, which traditionally falls on 1 January, while others mark New Year’s on other dates, such as 1 March or the Chinese New Year. While New Year’s Day is celebrated on different dates around the world, we all can find solace in celebrating the start of the New Year and new opportunities.

Some examples of the different celebrations are, in Japan New Year’s Day is known as Oshogatsu and is celebrated by families gathering to eat a traditional New Year’s meal called osechi ryori. In many Latin American countries, New Year is a time for friends and family to gather, enjoy a meal, and light fireworks. New Year’s Day is also celebrated with parades and festivals in many countries, such as the famous New Year’s Eve Ball Drop in New York City’s Times Square or the Sydney Harbour fireworks display in Australia. No matter where you are, New Year is a time for celebration!

As New Year is celebrated at different times in different parts of the world, it means that New Year’s Day celebrations span days and even weeks rather than just one single day. This allows people to experience New Year and its traditions throughout its start, giving New Year’s celebrations around the world a truly global flavor. So, even if New Year doesn’t fall on the same day for everyone, it remains an important global celebration that brings us all together.

No matter where you are or when New Year falls on your calendar, New Year’s Day is a time to come together with friends and family and celebrate the New Year. However, you celebrate New Year’s – whether that’s according to the Gregorian calendar or your own cultural traditions – it’s a time of renewal, reflection, and hope for the future. So, while New Year may not fall on the same day for everyone, it’s a time to celebrate!

Fun Fact:

The first known celebration of a new year took place in Ancient Babylon nearly 4,000 years ago. The Babylonians celebrated their new year, known as Akitu, for 11 days in what would be modern-day Iraq. The festivities were filled with parades and parties, and a re-enactment of the myth of Marduk—the god who defeated the chaos monster Tiamat. The ancient Romans also marked the beginning of a new year with celebrations, usually lasting from December 17th through January 1st. The celebration was called “Saturnalia” and featured feasting, drinking, gift-giving, and merrymaking. The Roman version of New Year’s resolutions involved asking the gods for forgiveness for any wrongdoings from the previous year.

Stephanie’s Section

New Year’s Resolutions

New Year’s Resolutions are an important part of planning for a successful year ahead. New Year’s resolutions have been used for centuries to set intentions and goals for the upcoming year. Making New Year’s resolutions can be an empowering first step in focusing your energy on achieving the things you want to accomplish. Whether it’s personal, professional, or financial goals, New Year’s resolutions can help you gain clarity and direction for your life.

The key to successful New Year’s resolutions is setting achievable goals that are specific, measurable, attainable, relevant, and time-bound (SMART). Set realistic expectations for yourself and be sure to break down long-term goals into smaller, achievable tasks. As you track your progress and start to reach milestones, remember to reward yourself for your accomplishments along the way.

By setting New Year’s resolutions and following through on them, you can make this year a great success. Take some time to reflect on what you want to achieve in the upcoming year and create a plan of action to make it happen. With some dedication and hard work, you can use New Year’s resolutions to make real and lasting positive changes in your life. Stay focused and don’t forget to reward yourself along the way. Happy New Year! Wishing you all the best for 2023!

Search by Zip to Find Applicable Energy Laws

January 4, 2023

A Gift for You

A Gift for You! All New VertPro.com

Be one of the first to experience a new and improved Energy Benchmarking Dashboard with new easy-to-use features. Managing your entire portfolio has never been easier and faster!

With a growing client base and additional services, the new platform will create a better customer experience by managing multi-service compliance requirements in one easy-to-use space. From benchmarking and audits to building upgrades and rebates, the new platform will identify all energy-saving opportunities for multi-building portfolios with the click of a button.

New users can enjoy the new and improved dashboard that consolidates all their information in one safe and secure place upon sign-up. In contrast, existing users will experience the new dashboard and features upon rollout on January 2, 2023. A notable new feature is the chat box which adds to a more user-friendly platform, creating ease of contacting a professional with any questions. A refreshed energy scorecard tool utilizes all your building’s information to discover the amount of money that can be potentially saved by implementing energy-saving measures.

VertPro® makes it easy to identify new opportunities, implement upgrades, and comply with various, often confusing, local, and federal sustainability regulations. The platform’s innovative features simplify the process from start to finish, allowing building owners to save money, reduce project risks, decrease operating costs, and increase property values. From identifying underperforming buildings, and conducting Energy Audits to find cost-effective improvement opportunities, to sourcing energy rebates and financing opportunities to get your projects off the ground, VertPro® does it all. Sign up today to reveal the new features we couldn’t wait to share with you

“Without change, there is no innovation, creativity, or incentive for improvement.” – William Pollard

Closing out 2022 Compliance & Looking Ahead

As we close out 2022, and with 2023 quickly approaching, it is important to make sure you have complied with all benchmarking laws for 2022. With only 25 days left in 2022, time is of the essence to avoid potential fines and violations for non-compliance. If you have already completed your 2022 benchmark, it is a great time to start planning for your 2023 benchmark! Looking ahead to the upcoming year it is important to note that more cities are adopting benchmarking laws and requirements are being updated for already existing laws.

Adding to the already 50+ cities that have benchmarking requirements, New Jersey State and Miami, FL will begin to require compliance with benchmarking laws starting in 2023. The City of San Francisco will also require all multi-family buildings to upgrade fire alarm systems. Planning early for this will be beneficial as fire horn prices are set to drastically increase by 20-30% in 2023.

The City of San Francisco will require all multi-family buildings to upgrade fire alarm systems to pass the “Pillow Test” to comply with the SFFC Section 1103.7.6.1. After several devastating apartment fires hit the City in 2016, the San Francisco Board of Supervisors passed legislation to seriously strengthen safety in multi-family properties. Most of these requirements went into effect shortly thereafter. However, a new mandate goes into effect on July 1, 2023, requiring a manual fire alarm system that would be more likely to wake sleeping residents.

These new alarms are not only louder but more effective, as they also use low-frequency horns or speakers that are more likely to wake a sleeping person. These lower frequencies require more energy to make them sound and unfortunately most existing fire alarm systems are not designed to handle the additional power required. Therefore, a new system will often be required to be installed before July 1, 2023.

As energy efficiency continues to be an increasingly important issue for cities, states, and the nation, new energy laws and regulations are being enacted to mandate better performance from commercial and multifamily properties. Metrics you need to reach, deadlines, and specifics on how to file your energy performance with your municipality vary from city to city. To find out what this means for you and your building continue reading here: The Vert Report Vol. 25 – New Energy Efficiency Laws (vertenergygroup.com)

Get to Know Your Local Energy Audits

With consistently changing laws and regulations, and new requirements being added every year, we understand that compliance can be tricky. Energy Audits are the first and most critical step toward understanding how energy is being used, how it is being wasted, and how you can take control of future price increases. To ensure compliance by deadline it’s suggested that you request your audit 6-9 months prior to the due date, making it time to start planning for 2023!

Vert Energy Group has been servicing the Los Angeles and San Francisco area for many years and are experts in the Energy Benchmarks and Energy Audits/RCx field. Vert Energy Group engineers conduct their audits in accordance with the high standards developed by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE).

We have compiled a breakdown of important dates and requirements for upcoming Energy Audit deadlines for Atlanta, GA; Boston, MA; Austin, TX; Seattle, WA; and Reno, NV. These are cities in which we are now available to help complete your Energy Audit and keep you in compliance! Mark your calendars with important dates, and requirements to avoid potential fines/violations.

Atlanta, GA

CBEEO- Commercial Building Energy Efficiency Ordinance

Deadline:

· Dec 31, 2022: Bldg IDs ending in “2”

*2022 deadline extended to January 4th, 2023

· Dec 31, 2023: Bldg IDs ending in “3”

· Dec 31, 2024: Bldg IDs ending in “4”

· Dec 31, 2025: Bldg IDs ending in “5”

· Dec 31, 2026: Bldg IDs ending in “6”

· Dec 31, 2027: Bldg IDs ending in “7”

· Dec 31, 2028: Bldg IDs ending in “8”

· Dec 31, 2029: Bldg IDs ending in “9”

Sq. Ft. Minimum:

· Commercial ≥ 50,000

· Public ≥ 25,000

Length of Compliance: Every 10 years starting in 2020

Audit must be comparable to an ASHRAE Level II
audit.

Austin, TX

ECAD – The Energy Conservation Audit & Disclosure Ordinance

Deadline: Time of Sale / June 1, 2023

Sq. Ft. Minimum:

· Multifamily bldgs ≥ 5 units, 10 years or older

· Homes 1-4 units, 10 years or older

Length of Compliance: Time of Sale & once every 10 years after

Exemptions:

·Bldg is less than 10 years of age.

· Bldg participated in Austin Electric Utility program or Austin Energy Free Weatherization Program within 10 years of the sale and performed appropriate efficiency measures, or the purchaser has agreed to do so within six months after the time of sale.

Energy Audits + Mandatory Upgrades: After conducting an audit, multifamily owners whose energy use exceeds 150% of the average must implement improvements
to reduce energy use by 20%.

Boston, MA

BERDO – Building Energy Reporting and Disclosure Ordinance

Deadline:

· May 15, 2021: Non-residential bldgs 35,000 to 50,000 sq. ft.

· May 15, 2022: Residential bldgs ≥ 35 units or 35,000 sq. ft.

· May 15, 2024: Non-residential bldgs ≥ 50,000 sq. ft.

· May 15, 2025: Residential bldgs ≥ 50 units or 50,000 sq. ft.

Sq. Ft. Minimum:

· Commercial ≥ 35,000

· Public ≥ 25,000

· MultiFamily ≥ 35,000/35 units

· All Public/Gov’t

Length of Compliance: Every 5 years

Audit OR performance actions required. Actions are significant investment in efficiency, comprehensive energy management plan, or retro-commissioning of energy systems. Bldgs over 50,000 sq. ft. have more stringent requirements. Owners can comply by retro-commissioning instead of an audit.

Reno, NV

ReEnergize: Energy and Water Efficiency Program

Deadline:

· 2026: City bldgs.

· 2028: Agency-owned/privately-owned bldgs ≥ 100,000 sq. ft.

· 2029: Agency-owned/privately-owned bldgs ≥ 50,000 sq. ft.

· 2032: Agency-owned/privately-owned bldgs ≥ 30,000 sq. ft.

Sq. Ft. Minimum:

· Commercial & Multifamily ≥30,000 and does not meet performance target

· Public/Gov’t ≥ 10,000 and does not meet performance target

Length of Compliance: Every 7 years

Exemptions: For energy and water audit:

· LEED Existing blgs (2009 or later)

· LEED O&M for existing bldg (Version 4 or 4.1)
Comparable rating system for existing bldgs

Retuning or an energy and water audit are pathways to fulfill performance targets of the law.

Seattle, WA

Building Tune-Ups, SMC: 22.930

Deadline:

· Oct. 1, 2021: bldgs 50,000 to 69,999 sq. ft. excluding parking

· Oct. 1, 2023: bldgs ≥ 200,000 sq. ft.

· Oct. 1, 2024: bldgs 100,000 to 199,999 sq. ft. excluding parking

· Oct. 1, 2025: bldgs 70,000 to 99,999 sq. ft. excluding parking

Sq. Ft. Minimum:

· Commercial and City-owned ≥ 50,000

Length of Compliance: Every 5 years

Building energy and water tune-ups include both mandatory and voluntary corrective actions for building owners to undertake.

If you are looking for more information about your city’s requirements or if your city isn’t listed above, head on over to https://vertpro.com/2023-Energy-Audits to speak with a professional today! A compliance specialist will answer any questions you may have and help simplify any requirement to get you in compliance today!

“The biggest room in the world is the room for improvement.” – Helmut Schmidt

How to Build Santa’s Sleigh

Santa’s sleigh is one of the most iconic images of Christmas, but have you ever wondered how it is put together? Santa sure knows his way around a toolbox! Here are some tips on how to build your own sleigh just like him.

First, you’ll need to gather your materials. For the frame and body of the sleigh, you’ll need wood. Make sure you pick pieces that are strong and light! You’ll also need some large nails or screws to hold it together. For the runners, you can use either metal or wood – just make sure they’re smooth for a comfortable ride. Next up is painting your sleigh. Choose a festive color like red, green, or white to get that classic Santa look. Don’t forget to add some eye-catching decorations like jingle bells and candy cane stripes!

Once you’re done painting and decorating, it’s time to attach the runners. Make sure they are securely fastened so your sleigh can take off with ease. To give it an extra special touch, why not add a few reindeer figurines on the front? Finally, you’ll need to give your sleigh some oomph. You can buy pre-made rocket boosters or attach some large helium balloons for a classic Santa lift-off! Be sure to keep the balloons safely away from any heat sources.

And there you have it – a festive sleigh that’s sure to make Santa proud! Whether you plan on taking off around the world or just using it for decoration, building your own Santa sleigh is an exciting and rewarding project. What are you waiting for? Get to building your Santa sleigh today!

Fun Fact:

Did you know that Jingle Bells was the first song to ever be broadcast from space? Upon re-entry to the earth’s atmosphere, ground controllers began to hear Jingle Bells being played by the astronauts aboard the Gemini 6!

Another fun fact about Jingle Bells: It was never written to be a Christmas song! James Lord Pierpont who wrote Jingle Bells first performed it at a thanksgiving church service. If you listen to the lyrics there is no mention of any holiday at all! Jingle Bells only became a Christmas song decades later in 1857! Source

Stephanie’s Section

Holiday Celebrations

No matter where you go, you can find something special to celebrate in the wintertime! Holidays during this season range from religious observances to secular festivities all around the world. Here are some of our favorite winter holidays from different countries. In Germany, people gather for Weihnachtsmarkt (Christmas Markets) which are festive public markets filled with traditional treats and sweets. Decorated stalls are scattered throughout the streets, offering visitors hot drinks, handmade items, and plenty of holiday cheer.

In Japan, people celebrate Oshogatsu (New Year’s Day). It is a time for families to come together and reflect on the past year while looking forward to the future. Although gifts are exchanged, the emphasis is on spiritual renewal and appreciation for nature’s beauty. In the United Arab Emirates, Eid al-Fitr marks the end of Ramadan—a month-long period of fasting. After a day spent celebrating with family and friends, people dress in their finest clothes to attend mosques and offer prayers of gratitude. This is followed by a huge feast shared with family and friends known as the “Breaking of the Fast”.

Regardless of where you are in the world, winter is a special time to come together and celebrate! Holidays around the world provide us opportunities to come together and appreciate our differences while uniting over shared experiences and moments of joy. So, wherever you are this winter season, take a moment to explore the holiday traditions that make us all unique!

Happy Holidays!

Search by Zip to Find Applicable Energy Laws

November 28, 2022

Energy Benchmark for 2022 compliance

Last chance for a free 2022 Energy Benchmark for 2022 compliance
Vert Energy Group is offering a Free 2022 Energy Benchmark to 150 building owners/property managers! Sign up today to claim your free Energy Benchmark! (Limit one per user for one property not complied for 2022) With 2023 right around the corner, Vert Energy Group wants to protect you from multiple years of non-compliance, as some of you may already be incurring fines or penalties! Use this free code to avoid continued fees and get in compliance today!
With 50+ Energy programs nationwide, it can feel like you’re in a maze trying to identify and meet your building’s specific requirements. Vert Energy Group takes the guesswork out of compliance, assuring data accuracy and ease of filing. We offer several tools to help you best determine how to optimize your building’s efficiency and now offer Vert Rebates on Energy Benchmarks and Energy Audits when you post a project on VertPro® Upgrades. Limitations do apply but check with your project specialist to determine which of your projects may qualify for the Vert Rebate.
Vert Energy Group makes benchmarking fast and easy for your entire portfolio of properties when you register on our platform VertPro®. All it takes is 30 minutes- or less- 3 easy steps and you are done. If you have any questions schedule a 1-on-1 demo with our team of experts.
Get started today as the promo code BMFREE2022 is only valid until November 18th, 2022.

“Production is the only answer to inflation.” – Chester Bowles

Inflation vs building material costs

With rising inflation rates and turmoil in a post covid world, many are concerned about what this means to the building industry. Inflation can have a significant impact on building costs, as the cost of materials and labor tends to increase when inflation rates are high. To stay within budget, it is important to monitor inflation rates and be prepared for potential cost increases.
Inflation rates can vary significantly from year to year. For example, inflation in 2020 was around 2%, but the inflation rate as of September 2022 was a whopping 8.2% year over year. Source “CBRE’s new Construction Cost Index forecasts a 14.1% year-over-year increase in construction costs by year-end 2022 as labor and material costs continue to rise. Escalation should stabilize to the 2%-4% range in 2023 and 2024, on par with historical averages. A confluence of events—including soaring construction demand, inflation, pandemic-related restrictions, supply chain disruptions, labor shortages, and the war in Ukraine—are spurring rising, costs and uncertainty across the construction industry.” 2022 U.S. Construction Cost Trends | CBRE
Just one example of the impact is lumber costs. Lumber costs reached an all-time high in 2021, and while the cost has backed down some since 2021, more than 90% of builders say they still face shortages of wood for framing. The expectation is cost inflation for materials will begin to slow and largely return to typical levels by mid-2023.” However, given the large number of construction inputs—many of which are often subject to geopolitical risks such as tariffs and sanctions—costs for some materials may remain volatile. Supply chain-related disruptions should begin to ease, but ongoing global labor and component shortages will hamper production and logistics capacity. As a result, long lead times and material shortages will likely continue in the short term.” Source
Graph Source
Inflation is one of the key factors in building costs, making it very important to monitor rates and be prepared for potential cost increases year to year to stay within budget.

2023 SF Energy Audits approaching quickly

San Francisco Energy Audits are quickly approaching. The requirements of a San Francisco energy audit vary with the size, and use of a building. The San Francisco Environment Code Chapter 20 sets a high standard: audits must meet or exceed the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) Procedures for Commercial Building Audits, with larger facilities required to receive a more rigorous evaluation than smaller facilities. The San Francisco Existing Buildings Energy Performance Ordinance requires buildings that are 50,000 square feet and larger to conduct an ASHRAE Level II audit or an “intermediate” survey and energy analysis. Buildings that are 10,000 to 49,999 square feet in size require an ASHRAE Level I audit or basic energy analysis. Deadlines vary based on when the last report was submitted, but an energy audit is required to be completed every 5 years. Important dates to remember of when these requirements were enacted: April 1, 2021: Non-residential bldgs ≥ 50,000 sq. ft. Apr 1, 2022: Non-residential bldgs 25,000 to 49,999 sq. ft. Apr 1, 2023: Non-residential bldgs 10,000 to 24,999 sq. ft. Check with your Vert Energy Audit specialist today to see if your building is due for an energy audit and if any additional requirements are mandatory.

“We shape our buildings: Thereafter, they shape us.” -Winston Churchill

Building Materials and Process for Mayflower Ships
We all know the Mayflower set sail for America in 1620, but how many of us understand the long and complicated building process that led to the success of that maiden voyage? The Mayflower ships were built using traditional materials and methods but were equipped with state-of-the-art guns and cannons for protection and sails that were made from the best materials available, resulting in a ship that was able to sail across the Atlantic Ocean and reach America safely.
The Mayflower ship was built using several traditional materials and methods for the time, but this was far from a simple feat. The hull of the Mayflower was made from oak timbers that were cut down and hand-shaped into the desired shape. The oak timbers were then hewn by hand to make them smoother and fastened together with wooden pegs. Finally, the sails were made from linen or hemp, and the hemp or flax rigging was installed. The back-breaking work required to source the materials used to build, and the manpower required for these building methods made the success of the Mayflower’s journey even more impressive.

Comparatively building the Mayflower today would be a much easier feat. With the technology and machines, we now have, it would take a fraction of the time and effort. We would replace oak timbers with steel for the hull, aluminum for the sails, and synthetic materials for the rigging. The guns and cannons would be replaced with machine guns and missile launchers. Overall, the mayflower ship was a technologically advanced ship for its time.

Nowadays, there are mayflower replicas that you can visit and tour to get a feel of how life may have been like on the original mayflower ship. These replicas are also built using traditional methods and materials, so you can get a sense of how difficult and time-consuming the process was.

It took a lot of hard work and dedication to build the Mayflower ship, but thanks to the efforts of the builders, the Mayflower ship was able to set sail and successfully cross the Atlantic Ocean, a remarkable feat and building material choice for its time.

Fun Fact:

Thanksgiving Day continues to be one of the busiest travel days year after year. The entire week of thanksgiving will see a record number of people traveling, with an expected 54 million Americans traveling to see friends and family. According to a recent Thanksgiving Travel Survey, ’more than 43% of American adults plan on traveling to a vacation destination or holiday gathering this year on Turkey Day. With travel rapidly recovering, the 2022 holiday season is looking to be extremely busy, with many people flying for the first time in a few years.” Source According to thevacationer.com the best day to fly is Thanksgiving Day or Black Friday if you can’t depart earlier in the week. See the table below for more suggestions!

Stephanie’s Section
British Royal Family Post Queen Elizabeth Queen Elizabeth II, reigning queen for 67 years, was one of the most respected and beloved members of the British royal family. Her recent passing will largely impact not only the British Royal Family but also British society and culture. Queen Elizabeth was not only head of state but a stabilizing force for the royal family, and her death will likely change the way in which the British royal family functions. Prince Charles, now king, will hold more power than the former queen, as Britain is a constitutional monarchy. A constitutional monarchy is a form of government in which a monarch is head of state, but the powers of the monarch are limited by a constitution. Many believe Prince Charles will be a more hands-on King than his mother, and we will see many changes under his reign. Prince Williams’s future in the British royal family is also unclear. While a current working member of the royal family, it is possible that he will step back from his role or even leave the royal family entirely. The role of the British royal family in 21^st-century Britain is primarily ceremonial. While the royal family is of noble birth, they do not hold any real political power, but play a very important role in British society and culture. The family’s main duties are to represent Britain domestically and internationally, to support British interests, and to provide a focus for national unity. Some of the challenges the British Royal family faces in the 21^st century include maintaining relevance in a society that is increasingly secular, the royal family must manage public perception in the wake of negative publicity and scrutiny, dealing with financial constraints, addressing the issue of succession, while navigating changing social norms and expectations. With a net worth estimated to be around $88 billion, the world is watching to see what will come of the British Royal family post-Queen Elizabeth II. A beacon for the British people and British society, her impact and passing will be felt for years to come.

Want your Make Your Building Green? Get an Energy Audit! »

Search by Zip to Find Applicable Energy Laws

There are over 30 cities/states with Energy Benchmark requirements – 16 have Energy Audit requirements as well! Use this free tool to check if your building has an upcoming Energy Benchmark or Energy Audit deadline.
FIND OUT HERE »

November 3, 2022

New Evolving Energy Efficiency Laws

Today, nearly everyone accepts that we must transition away from the use of fossil fuels, as the damage happening to our planet and environment is astronomical. This has led to many science and business innovations as we search for new sustainable or renewable alternatives to coal, oil, and gas.

One such innovation is energy efficiency. This is the practice of using less energy to achieve the same goal, whether that’s powering a home, running a business, or manufacturing a product. For example, new energy-efficient lightbulbs use less electricity than traditional incandescent bulbs to produce the same amount of light. In the United States, new energy efficiency standards for appliances and equipment have led to significant savings in electricity use. New laws and regulations are increasingly requiring that products use less energy, and while some of these new efficient products may cost more upfront, over time they save money and help reduce our reliance on fossil fuels.

As the world transitions to a low-carbon future, energy efficiency will play a critical role in reducing greenhouse gas emissions and slowing the rate of climate change. In 2018, the United States updated its energy efficiency standards for commercial buildings. These new standards will require new buildings to be more energy efficient than ever before, and they will spur businesses to invest in energy efficiency upgrades for existing buildings. The new standards are estimated to save businesses $12 billion in energy costs over the next 30 years. And by 2030, the standards are expected to reduce carbon dioxide emissions by 160 million metric tons—the equivalent of taking 33 million cars off the road for a year.

As energy efficiency becomes an increasingly important issue for cities, states, and the nation, new energy laws and regulations are being enacted to mandate better performance from commercial and multifamily properties. Metrics you need to reach, deadlines, and specifics on how to file your energy performance with your municipality vary from city to city.

For commercial building owners, new energy efficiency laws are taking effect that will require significant improvements in the way their buildings use energy. These laws are designed to promote energy conservation and reduce greenhouse gas emissions. Many commercial building owners are already taking steps to improve their buildings’ energy efficiency, but the new laws will require even more changes. There are incentives for those who do make their buildings more energy efficient, including tax breaks, utility rebates, and other financial assistance. It is also important to note that building owners who don’t comply with the new laws may be subject to fines or other penalties.

An example of such regulations is the newly adopted standards for consumer appliances and the energy-saving rules for federal buildings. The U.S. Department of Energy (DOE) released new building energy code requirements “that will save taxpayer dollars and ensure that the federal government leads by example in energy efficiency. Beginning in April 2023, all new buildings and major retrofits constructed by the Federal government must comply with the 2021 International Energy Conservation Code (IECC) and the 2019 American Society of Heating, Refrigerating, and Air Conditioning Engineers Standard 90.1 building energy codes. DOE estimates that this measure will save $4.2 million dollars in operating costs within the first year of implementation.” Source

Another example is California’s Building Decarbonization Partnership. The Building Decarbonization Partnership is a voluntary, non-regulatory program that helps buildings stakeholders identify and overcome barriers to achieving deep energy savings in their buildings. The Partnership provides resources and technical assistance to help participants save energy, money, and water, and achieve their climate goals. The Partnership is open to any multifamily or commercial building owner, manager, or operator who is interested in reducing energy use and greenhouse gas emissions in their buildings. There is no cost to participate in the Partnership. “California’s buildings produce a quarter of the state’s greenhouse gas (GHG) emissions, making homes and businesses a major factor in climate change. The California Building Decarbonization Assessment provides a framework to tackle the challenges in developing a path toward reducing GHG emissions associated with California’s buildings.” Source

These are just two examples of how the United States is leading the way in energy efficiency. While making your commercial building more energy efficient can be a challenge, it’s one that is well worth the effort. Not only will you save money, but you’ll be doing your part to help protect our environment.

“In reality, studies show that investments to spur renewable energy and boost energy efficiency generate far more jobs than oil and coal.”-Jeff Goodell

Upcoming Energy Audits deadlines for (LA, SF, SJ, Austin Tx, Seattle WA, Atlanta GA, Boston, Washington State)

With consistently updating laws and ever-changing regulations, we have compiled a list of important dates and requirements for the upcoming Energy Audit deadlines for Los Angeles, San Francisco, San Jose, Austin, Seattle, Atlanta, Boston, and the state of Washington. Mark your calendars with important dates, and requirements to avoid potential fines/violations.

Location	Deadline	Additional Requirements:
Los Angeles, CA	June 1, 2023: Bldg IDs ending in “4” December 1, 2023: Bldg IDS sending in “5”	Energy Audit, Water Audit & Retro-Commissioning (Every 5 years)
San Francisco, CA	April 1, 2023	Energy Audit or RCx (Every 5 years)
San Jose, CA	May 1, 2023	Last Digit of APN 0,1
Atlanta, GA	December 31, 2023	2022 deadline, extended to January 4^th, 2023 Every 10 years) starting in 2020
Boston, MA	June 15, 2023	Every 5 years starting in 2010
Austin, TX	June 1, 2023	Energy Audits + Mandatory Upgrades
Seattle, WA	October 1, 2023	Periodic Tune-Ups for Larger Commercial Buildings
Washington (State)	April 1, 2023	Energy Audits

Audits and RCx can take substantially longer than benchmarks as on-site inspections conducted by licensed professionals (LP) are required. A minimum of one on-site inspection is required to gather information and depending on the complexity and size of the building, additional on-site visits may be needed to get a full scope of the building and its systems and equipment. Any missing information can cause inaccurate reporting and delay the process of filing. To assure compliance by the deadline it is suggested that you request your audit 6-9 months prior to the due date, making this the time to start planning for 2023!

Fines or Violations for missed Energy Benchmark Deadlines

Penalties for Missed benchmark deadlines

Missed benchmark deadlines can be a costly mistake for building owners. Every year building owners and managers are required to ensure their property is in compliance with their local city or state energy benchmark programs. Many benchmarking programs have penalties, and failure to file can result in written warnings and/or monetary fines. Non-compliance fines can add up quickly, so it is important to be aware of deadlines and the penalties for missing those deadlines. While not all benchmark programs have monetary fines or official warnings, each city and state agency keeps records. These are often made public via a compliance list, to hold building owners accountable and enforce compliance. These compliance lists can be located on your local city or state benchmarking website or by contacting your local programs support line directly. The following is a complete chart of Benchmark programs with existing penalties for non-compliance:

Benchmark Program	Annual Deadline	Penalty for Non-Compliance
Atlanta Commercial Buildings Energy Efficiency Ordinance	June 1^st	$1,000
Austin Energy Conservation Audit & Disclosure (ECAD) Ordinance	June 1^st	$500-2,000
Berkeley Building Energy Saving Ordinance	July 1st	$100-1,000
Boston Energy Reporting & Disclosure Ordinance	May 15^th	$35-200
California Assembly Bill 802 (CA AB802)	June 1^st	$500-2,000
Cambridge Building Energy Use Disclosure Ordinance	May 1^st	$300/day
Chicago Building Energy Use Benchmarking Ordinance	June 1^st	$100 + $25/day
Chula Vista Building Energy Saving Ordinance	May 20^th	$750-2,250
Denver Commercial & Multifamily Building Benchmarking	June 1^st	$2,000
Des Moines Energy & Water Benchmarking Ordinance	May 1^st	$50 + $300-500/day
Evanston Building Energy & Water Use Benchmarking Ordinance	June 30^th	$100
Fort Collins, CO Ordinance 144 Building Energy & Water Scoring	March 1^st	$1,000
Los Angeles Energy & Water Efficiency (LA EBEWE)	June 1^st	$202
New York City Local Law 84 (NYC LL84)	May 1^st*	$500-$2,000
Philadelphia Building Energy Benchmarking Ordinance	June 30^th	$300 + $100/day
Pittsburgh Building Benchmarking Ordinance	June 1^st	Publicly listed non-Compliant
Portland Energy & Water Use Performance Benchmarking Ordinance (Maine)	May 1^st	$20/day
Portland Commercial Building Energy Reporting (Oregon)	April 22^nd	$500
Reno Energy & Water Efficiency Program (Ordinance 7068)	April 1^st	$850
Saint Louis Building Energy Awareness Bill	April 1^st	$50-1,000
Salt Lake City Elevate Buildings	May 1^st	$500-1,000
San Francisco Existing Commercial Buildings Energy Performance Ordinance (SF EBO)	April 1^st*	$50-2,500
Seattle Council Bill 116731 (CB116731)	July 1^st	$150-500/day

Quote: “Energy-saving technologies keep improving faster than they’re applied, so efficiency is an ever larger and cheaper resource.” – Amory Lovins

Top 10 Vert Employees Halloween Movies

Hocus Pocus Copyright by Disney 1993 – disneyplus.com

Halloween movies are a great way to get into the Halloween spirit. Whether you’re looking for spooky, funny, family-friendly, or just downright creepy, there’s sure to be a Halloween movie out there for you. Grab some popcorn and get ready to be scared because the Vert Energy Team has compiled a list of our all-time favorite movies to watch on All Hallows Eve and these are the top 10 winners!

In order of the most suggested titles by employees:

Hocus Pocus
Nightmare on Elm Street
Halloweentown
The Nightmare before Christmas
Halloween
Practical Magic
The exorcist
Young Frankenstein
The Thing
Scary Movie

As one of the most iconic Halloween movies of all time, it’s no surprise Hocus Pocus was the most chosen Halloween movie to watch among Vert Energy Group employees! Hocus Pocus has been praised for years for its humor, performances, and iconic songs. For an extra special surprise, head on over to Disney+, as Disney released Hocus Pocus 2, just in time for Halloween 2022! Gather your coven, grab your candy corn, and prepare for the ultimate Halloween movie night with a Hocus Pocus double feature!

Fun Fact:

Halloween is a big industry in America. Every year, Americans spend billions of dollars on Halloween costumes, decorations, and candy. The Halloween industry has grown significantly in recent years, and it shows no signs of slowing down. According to the National Retail Federation‘s seasonal shopping trends this year, conducted by Prosper Insights & Analytics, Americans are predicted to spend $2.6 billion buying candy for Halloween, in comparison to $3.2 billion on costumes and $2.7 billion on decorations. 172 million people in the United States celebrate Halloween — and about 95% are predicted to purchase candy. That’s a lot of candy corn!

Stephanie’s Section

Houdini’s Final Performance

Halloween, a fun holiday with costumes, and candy, also happens to be the death date of one of the best escape artists in history, Harry Houdini.

Harry Houdini was a famous magician who dazzled crowds for over 30 years. He was born in Hungary in 1874, and he immigrated to the United States with his family when he was a young boy. Houdini was known for his daring escape acts. He would escape from handcuffs, chains, and even straight jackets, often in water or other dangerous situations. Houdini was also an accomplished aviator, and he set many records for flying machines.

On October 24, 1926, Harry Houdini was performing at the Princess Theatre in Montreal. During his show, he invited a member of the audience to come onstage and punch him in the stomach as hard as they could. This was part of Houdini’s act, and he had done it many times before without incident. However, this time was different. The student who punched Houdini, J. Gordon Whitehead, hit him so hard that Houdini collapsed and had to be taken to the hospital.

Houdini initially seemed to recover from the incident, but his condition quickly deteriorated. He is said to have died of peritonitis after his appendix ruptured, but the circumstances of his death remain mysterious to this day. At age 52, on October 31, 1926, Halloween night, Harry Houdini died.

While none would argue Harry Houdini’s death was a tragic event, some people believe that Harry Houdini’s death was not accidental. There are many wild theories about what really happened to Houdini, and many seem to believe that he was murdered.

One theory is that Houdini was killed by the Mafia. It’s well known that Houdini was very critical of the Mob, and he had made enemies within the organization. It is possible that the Mafia ordered Whitehead to punch Houdini in the stomach as a way of getting revenge.

Another theory is that Houdini was killed by the KGB. This theory emerged after the release of previously classified documents in 2006. These documents showed that Houdini had been under surveillance by the KGB for many years. It is possible that the KGB ordered Whitehead to punch Houdini to silence him.

Whether or not he was murdered, his death shocked the world, and his legacy has lived on ever since. Harry Houdini was a true pioneer in the world of magic, and his death is still the subject of conversation decades later.

Search by Zip to Find Applicable Energy Laws

October 5, 2022

Author: Clarence Cannon

Vert Energy Group – New York City Local Law 97 Compliance Due this Year

“Building owners are enthusiastic in my experience as the NYS and NYC Govts have put in place numerous incentives that are quite rich at the moment to help with compliance. Additionally, they are happy the changes will save them money long term” -Anthony Pereira: altPOWER

Why You Should Start Your Benchmark Earlier

LA EBEWE Rescinds Tolling

“LOSE AN HOUR IN THE MORNING, AND YOU WILL BE ALL DAY HUNTING FOR IT.― RICHARD WHATELY”

History Behind the Blarney Stone

Fun Fact: NYC is the most linguistically diverse city in the world.

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws

Vert Energy Group – 2023 New Energy Benchmark Deadlines

All Energy Benchmark Deadlines for 2023

“Formula for success: rise early, work hard, strike oil.” – J. Paul Getty

2023 Energy Audit Deadlines

San Francisco Fire Horns 2023 Deadline

“Once an organization loses its spirit of pioneering and rests on its early work, its progress stops.”-Thomas J. Watson

10 Unique and Quirky Things to do for Valentine’s Day

Fun Fact: No one knows who St. Valentine was

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws

Vert Energy Group – Ringing in the New Year with a New Website and New BM Laws

Source: Building Efficiency 305 – BE305 – Miami (miamigov.com)

“I like the dreams of the future better than the history of the past.” – Thomas Jefferson

New Weekly Blog Series on VertPro.com/Blog/

The Arctic Blast and how much strain it can put on a heating system

“Cheers to a new year and another chance for us to get it right.” —Oprah Winfrey

Does everyone celebrate the New Year on the same day?

Fun Fact:

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws

A Gift for You

A Gift for You! All New VertPro.com

“Without change, there is no innovation, creativity, or incentive for improvement.” – William Pollard

Closing out 2022 Compliance & Looking Ahead

Get to Know Your Local Energy Audits

“The biggest room in the world is the room for improvement.” – Helmut Schmidt

How to Build Santa’s Sleigh

Fun Fact:

Did you know that Jingle Bells was the first song to ever be broadcast from space? Upon re-entry to the earth’s atmosphere, ground controllers began to hear Jingle Bells being played by the astronauts aboard the Gemini 6!

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws

Energy Benchmark for 2022 compliance

Last chance for a free 2022 Energy Benchmark for 2022 compliance

“Production is the only answer to inflation.” – Chester Bowles

Inflation vs building material costs

2023 SF Energy Audits approaching quickly

“We shape our buildings: Thereafter, they shape us.” -Winston Churchill

Building Materials and Process for Mayflower Ships

Fun Fact:

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws

New Evolving Energy Efficiency Laws

“In reality, studies show that investments to spur renewable energy and boost energy efficiency generate far more jobs than oil and coal.”-Jeff Goodell

Upcoming Energy Audits deadlines for (LA, SF, SJ, Austin Tx, Seattle WA, Atlanta GA, Boston, Washington State)

Fines or Violations for missed Energy Benchmark Deadlines

Quote: “Energy-saving technologies keep improving faster than they’re applied, so efficiency is an ever larger and cheaper resource.” – Amory Lovins

Top 10 Vert Employees Halloween Movies

Fun Fact:

Stephanie’s Section

Search by Zip to Find Applicable Energy Laws